Thursday, June 4, 2009

Update to Spending


Not much to report, I'm still stuck with a 110lb monitor I can't lift into place.
Not really much as happened other then this MASSIVE stall.
However there were a few small things.

Thanks to the guys over at CGCC again I was able to get video cards with S-Video out for free. They are used to send the signal from my computer to the SONY PVM 2530'S picked up. I have purchased three Sony PVM monitors, delivered they cost me $175.
So that's about $60 each !

Tuesday, April 28, 2009

How To Install The Monitor

Had the brother in law over on Sunday. He can build just about anything this guy and is super handy..........in fact, he's everything I'm not when it comes to tools.
I was stumped on how to go about installing the monitor. I didn't know how I would get the angle correct, I measured it 100 ways, but nothing made sense to me. The monitor isn't light, its 100lbs! As per my brother in law the best thing to do would be have two guys lift it into place. Simply eyeball it to see which angle looks best, then draw two lines directly under the monitor. From there we would just rip down some wood to use as supports. Build the shelf, install monitor, make sure it doesn't fall out and MAME is done.

My 2nd, 2009 is my wedding. Its been the one thing that has consumed me for the last several weeks. Once the wedding is over and life goes back to normal I will %100 complete this project. It's been along while now,but I'm very happy.
I look forward to perhaps getting some new goodies at the next auction.

Monitor Issues

When I had my three Sony PVM monitors delivered I was so excited. Right away I had gone downstairs with my PC under my arm and completed control panel in the other hand. I cleared a spot on the floor and began putting everything together. As said all over the net it's best to make sure everything works together prior to doing the install. These new 25" monitors would be a huge step up from the 19" CRT I was going to use. Not only is bigger better, but it would be identical in size to the monitor removed from the cabinet. So I cleared a spot on the basement floor, hooked up the PC and some speakers to back of the monitor. Next step was making sure my new video card was installed correctly, and hooking up my control panel to the IPAC.

With all said and done I fired everything up, there were a few configuration issues. The video card had two display options, 800 x 600 (I think) and something else. I had to fiddle with this to make sure the entire screen was filled. The text on screen was also very difficult to read. These Sony monitors were/are? considered good monitors, they are meant for professional studio use. However with age and changes in technology they pale in comparison to today's monitors. Perhaps a combination of things, I'm unsure, but the picture needed work.

I had to make a couple of changes to get things the way I liked.
The resolution of the video card had to be adjusted.
To make the text readable I had to adjust the font size in MAME.
The same was required for Windows, much of the text on screen was not readable.
When these few steps were taking I could clearly see what game is was selecting, and able to read easily my on screen options. Now came time to adjust the monitor itself. It had a very "green" look to it. The Sony PVM monitors have a "reset" button on the front control panel. There is also an option for GREEN or PURPLE, DARKNESS, and I believe HUE. Each option has a + and - button used to get the desired effect. Sadly all the options on the left of my monitor don't work! The RESET doest do anything, and any adjustment that requires you to press "+" doesn't work.

Sadly this monitor (1 of 3) has been of no use to myself. I have it up for sale on the local Kijiji for $75. (What I paid) I'm in the process of trying to de-case the monitor. The guys over at the Build Your Own Arcade forums have provided some great advice. I might be able to swap out the defective part with a part from another working monitor. Make the required adjustments and then swap the part back into place. Once I have the desired look the monitor would remain stationary in the arcade cabinet, so constant adjustments would not be required. Its a great idea, perhaps a little out of my range...but as is the monitor is money wasted. So why not try to learn something and try to salvage it ?

When I discovered the one monitor wasn't working as I had hoped I went outside to the garage and began the "not so pleasant" task of hauling the remaining two 110lb monitors into the basement. Sadly by having the monitors delivered (saving me about a 2 or 3 hour round trip) I had purchased them sight unseen.....UNTESTED! I wanted to make %100 sure that this problem was exclusive to only the one monitor....It was!
I'm happy to say the other two monitors work flawlessly, they can be read clearly and easily. MAME looks great on them, the size is perfect and the colors vivid. I am very happy with the overall results.

I've decided to hang onto my 19" CRT in the event that I MAME a cocktail cabinet in the near future. The other two Sony PVM's will also remain with me. I figure worst case I will keep the broken one to source parts from, the other can be used for future projects or made available to my brother & friend whomever does a MAME project first.

Sunday, March 22, 2009

New Monitor In The House .....






So more of the same for myself. The wedding takes up just about all the free time I have. Its not often I even get time to watch a movie, let alone get downstairs to spend hours of something that the wife hates. Funny how life works out like that!
My dad had/has an older 25" RCA TV that he is going to part with,however when he decides to do this is the big question. Oddly he finds it totally fine to have his 50" Toshiba projection TV sit in the dining room! ( I don't get it! )

Anyway I was able to pick up three SONY PVM-2530 monitors for a great price. Not to mention they were delivered right to my door for an extra $25. That was great as it would have taken me about an 1.5 hours each way to get them, and would have cost me more then $25 in gas! (SWEET)

These monitors are HEAVY! I think they are about 116lbs each. They have an S-Video input on the back which is great. I can wire them directly from the PC video card right into the S-Video. And thanks to "altcharacter" over at CGCC I'll be picking one up today.

On Friday with a friend of mine I did make sure the monitor will fit into the Dynamo cabinet. It will be tight, but it will fit. I had to remove the trim that holds the bezel in place,but I will reinstall it when the monitor is in place. However I do think the placement of the monitor will be difficult. I say that more based on the overall weight of the item. I don't care if I have to cut a new bezel, in fact the bezel that came off the cabinet sucks anyway. I just think moving around this 116lb monitor in a tight area will pose some unique challenges. None the less this (along with installation of the new video card) is all that remains for the MAME project to be completed.

I must say that is an exciting thing, I was surprised in some ways I was able to pull it off. It was daunting at first, but I think I learned allot. I even think had I made this a priority it could have been done way sooner. Nothing was really that hard. I think 2 months of solid weekend work could have done the job. But whatever it took I'm excited. In June after the wedding I will finish the basement which has been a dream since I got the house. I'm excited for the auction next week (March 28th). I had wanted to pick up a Showcase cabinet, but I think space wise it simply isn't a wise choice. But now having these two other Sony monitors a few more cabinets couldn't hurt! (I'm sure the wife will see it otherwise) Id also like to a cocktail cabinet, I have my 19" PC monitor that I could use in that. I've picked up another IPAC so I have to do at least one more project !

Monday, January 5, 2009

A New TV


So the holidays have come and gone, as is my vacation. Not much was done on the MAME project, but really not much is required. Ive completed all needed testing, the IPAC works fine. My instruction cards have been designed and should help fist timers to navigate MAME. My Dad is still going to give me the old 25" RCA TV he has, but we haven't moved things around. For some reason he is stalling............I dunno why!
He has a new (for him) 50" that my little brother gave him and a 43" that I gave him that needs to get moved upstairs. Once that's done I can scoop up the RCA and install it. Once that's done it will be a little bit of work, installing it,lining it up,cutting the bezel,etc. I don't think it will take much, just need to make the time. Overall again I'm happy with the progress of the project. Its really come down to just "finishing touches."

Thursday, December 25, 2008

Whats Left ?


So with the controls done and out of the way my MAME project is nearing completion.
It seems every so often you have a plan and it never pans out the way it should. The plan for me was use the 19" CRT monitor that I have sitting around in my arcade project. It was small and a 25"-27" is more true with what was contained in the cabinet when I got it. I didn't have the TV and the video card I used provided me with less then stellar results. Then my dad tells me he has that 25"-27" RCA I could have. That was a major plus,but as is my PC doesn't have a means to send the picture to a TV. Then there was the issue that some games don't play on my MAME machine. From what Ive seen in my testing Midway games (NARC,NBA Jam,NFL Blitz,Mortal Kombat)don't play at full speed. One of the guys over at www.cgcc.ca said I should try FAST MAME. Now ....... I'm a guy who thinks "If it ain't broke don't fix it!." That's the way I feel about my existing system. I have the controls working well, a bunch of my favorite fighting games seem to play fine, why should I mess with that ? So that got me thinking, Id like to do a bar top MAME or even a cocktail MAME in the near future. So why don't I pick up a new PC, add a video card with S-Video out and try FAST MAME ? I decided I would try that. I'm not in the process of trying to get another PC to do a second full MAME install. But then another issue, I just picked up a 50" Panasonic Plasma TV on boxing day. I think id love to use the plasma as a monitor, and use the new/old PC as a means to stream movies and free online PPV. Ah the struggles, what do I do, what do I do ? For now no answer.

DONE! Well Almost . . .


OK remember I said I would be done the MAME cabinet for January ? Well I'm still working with that as my deadline. I've completed the wiring of the IPAC and everything "seems" to work fine. Ive been testing games every now and again in MAME.... but I find I keep going back to Street Fighter II: Rainbow .....
When I'm not playing SFII:Rainbow I'm making sure that everything functions the way it should. The computer boots up and goes right into MAME. Once in MAME the mouse inst visible and games can be selected using the joystick. Using the joystick you are able to select from Mike's Favorites and All Games. All buttons and directions work flawlessly. It was suggested I make sure the controls work before installing them into the cabinet. I don't think I've overlooked anything,but if I have it will just need to be resolved once installed in the cabinet. I'm still waiting on the PCB mounting feet that B1 (over @ www.cgcc.ca) sent me. Once they come ill install the controls into the cabinet. Today is Christmas and despite going to my parents I didn't pick up the RCA TV. I had planned to get that today and use that for the MAME monitor. We never did move around the big screens as planned so I'm still using the 19" CRT (for now).